Epoxy

high-performance mortar FIS V is the universal all-rounder for the most demanding requirements

Advantages at a glance

The injection system FIS V is the all-round talent for all important building materials and almost all tasks in non-cracked concrete, masonry and reinforcement. Additional variations FIS VW HIGH SPEED
with short curing times and
FIS VS LOW SPEED with longer processing times available. Extensive range of accessories for almost all applications.

The solid injection mortar for standard applications in cracked concrete and masonry

Approved for anchorings in:
▪ Concrete C20/25 to C50/60, cracked
▪ Hollow blocks made from lightweight concrete
▪ Vertically perforated brick
▪ Perforated sand-lime brick
▪ Solid sand-lime brick
▪ Solid brick
Also suitable for:
▪ Rebar connections
▪ Concrete C12/15
▪ Hollow blocks made from concrete
▪ Aerated concrete

Polyester resin grouts
Uses
Lokfix are used for high strength corrosion resistant anchoring
of bolts and bars from 10 – 51mm diameter into concrete, rock,
masonry or brickwork where high speed of installation and early
application of load is required.
Permanent installation of reinforcement starter bars, foundation
bolts, base plates, balustrading, barriers and safety fences,
railway tracks, tie-back anchors, reinforcement dowelling abutments,
ground anchors for towers, cranes, dock sills.
Advantages
 Rapid strength gain
 Vibration resistant
 Corrosion resistant
 Non expansive
 Can be placed under water
Standards and specifications
Materials tested in accordance with
BS 4551