Flooring & Coating

2 -part water dispersed epoxy resin primer

Product Description :

Solvent -free, water dispersed two part primer based on epoxy resin.

Uses:

As a primer and adhesion promoter on properly prepared:

New concrete

Cementitious screeds

Hardened concrete

EpoCem levelling layers

As a primer for: Sikafloor® -81 EpoCem ® and Sikafloor® -82 EpoCem ®

3-part cement and epoxy combination mortar for self-smoothing floor screeds of 1.5 to 3 mm

Product Description:

Sikafloor® -81 EpoCem® is a three part, epoxy modified cementitious, fine textured mortar for self smoothing floor screeds in thin layers of 1.5 to 3 mm.

Uses:

As a Temporary Moisture Barrier (TMB) (min. 2 mm thick) under Epoxy, Polyurethane and PMMA resin floors, over high moisture content substrates, even green concrete. As a self-smoothing screed for:

• Levelling or patching horizontal concrete surfaces, in new work or repairs, particularly in aggressive chemical environments
• Floor topping on non ventilated damp substrates without particular aesthetic requirements
• Levelling layer under Epoxy, Polyurethane and PMMA* floor coatings / screeds, tiles, sheet floors, carpets or wooden floors
• Repair and maintenance of monolithic and vacuum concrete floors Extended with quartz sand, as a patching and repair mortar:
• Under Epoxy, Polyurethane and PMMA floor coatings / screeds Designed for use on cementitious substrates.

Pre-Mixed Non-Metallic Dry Shake Floor Hardener

Product Description:

CHRYSO EMALITE – SOF is ready-to-use blend of factory processed and specially graded non-oxidizing, non-metallic aggregate, special cement and additives, free from oil, grease and other contaminants. When it is broad casted on freshly laid concrete, after finishing, it forms a tough, hard, wear resistance monolithic floor.

Uses:

• CHRYSO EMALITE – SOF provides a hard wearing, mineral dry shake topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, wear resistant smooth surface
• Typical uses are in warehouses, factories, shopping malls, public areas, restaurants and museums

Transparent surface hardener, dustproofer, sealing and curing compound for concrete

Product Description:

Sikafloor® -CureHard-24 is a one part, clear liquid based on sodium silicate to cure, harden and seal fresh or hardened concrete.

Uses:

• Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.
• On concrete slabs where no specific curing efficiency or standards are required
• Suitable for interior or exterior applications